If you want your interior paint job to come out looking like a level 5 finish, you must rely on the same tips and tricks professional painting companies use to deliver exceptionally smooth, long-lasting, vibrant results. Continue reading to learn some secret methods used by professionals that can be applied to your DIY painting project!
When you tape up baseboards before painting, it can seem like a pretty straightforward task. Apply the tape so that the woodwork is covered and move on; right? Well, many times, after the painting is finished and the tape is removed, you can find streaks or drops that managed to seep their way through. To avoid this, do what the pro’s do and use a putty knife to apply the painting tape on baseboards and molding. Press the knife against the tape to ensure a thorough seal. This prevents any paint from getting through.
Hole-Patching and Sanding
All holes and deficits should be filled in with a joint-compound patching product, smoothed down evenly, and allowed to dry completely. Once these areas of dry, you can sand away all the uneven surfaces. It is vital to sand away any surface flaws, like spackle, joint-compound patches, nicks, nail holes, scores, scratches, chips, and more the best you can. Sand baseboards, molding, walls, and more to get an even smooth surface. Once you have an even and smooth surface, you can move forward with your painting project.
When joint compound is painted over, it can sometimes absorb all the moisture from the paint and leave a duller, discolored look. This makes all the patched areas on a wall noticeable. To avoid this problem, which professionals refer to as “flashing”, be sure to apply a primer before painting. But to paint like a pro, use a tinted primer. Although white primer is acceptable and frequently used, professionals typically use a gray-colored primer, or a primer that is close to the color of the finishing paint. This covers patched areas and existing paint better than plain white or ivory primers. This results in a more vibrant finish and less applications.
Although you can purchase the same color in five cans, it is not guaranteed that all five cans will look exactly the same. This can be evident in a paint job when a new container is opened halfway through painting. It can result in a different color tones on a wall. To avoid this, professionals “box” their paint by pouring all cans into one large bucket to achieve one consistent color.
Ever wonder why a self-paint job looks streaky and a professional’s is always smooth and even? Well the secret is adding a paint extender or paint conditioner into your paint. Popular products, like Floetrol®, are designed to slow down the drying process of the paint, allowing a more balanced application and finish. Not only do paint extenders hide brush strokes, they also eliminate dark lap marks from painting over semi-dried paint.
When ceilings are textured or bumpy, it can be virtually impossible to paint a clean line between the wall and the ceiling. For this reason, professionals will use a screwdriver to scrape a ridge along the edge of the walls and ceiling. This creates a platform for painting a smooth straight line between ceiling and wall and prevents paint from sticking to ceiling bumps. The resulting ridge should be fine enough so that the lost texture is never noticed, but wide enough for brush bristles to fit.
Indianapolis Drywall and Painting Contractors
Call Drywall by Local Builders at 317-269-7319 when you need professional drywall repair and painting service in Indianapolis, Indiana. We are a licensed, bonded, and insured drywall company that provides residential and commercial drywall work at competitive prices. Call 317-269-7319 to request a free estimate, today.