What You Need to Cut Drywall in a Short Amount of Time

Ever wonder how professional contractors can get drywall cutting needs met within a short amount of time? Well, that is because they use an age-old, industry secret to save time. Interestingly, this secret method only requires two very basic and common toolbox staples: a tape measurer and a utility knife. But before you rush to the work shed for your toolbox and drywall supplies, it is important to understand that this method of cutting drywall requires a learning curve of practice.

After a lot of practice and patience, you too can cut drywall using this method, just like the pros do. Continue reading to learn how!

Indianapolis Drywall Contractors
Indianapolis Drywall Contractors 317-269-7319

How to Cut Drywall With Only 2 Tools

Many people naturally want to place the tape measurer hook at the edge of the drywall sheet for stability, but this is actually wrong. Instead, the tape measurer hook should be placed along the drywall board where you will be making the actual cut.

From there, you must place the tip of the utility blade against the tape measurer hook and then hold it in place by pinching it with your thumb. Steadily move your free hand to the end of the drywall board and pinch your thumb and forefinger together on the tape measurer at the right increment.

Here’s where practice will pay off for you. In one swift movement, simultaneously move your knife and hands down the drywall using a consistent downward pressure. Once you have completed the cut, simply snap off the scrap piece and cut the paper liner on the other side to separate it entirely.

Practice is the Real Secret

Be sure to practice this method of drywall cutting before making it a staple move in your work. Furthermore, be sure you are wearing all the proper protective gear to reduce the risk of serious injuries. If you are not adept in drywall work, or have little to no experience working with drywall materials, it is not recommended to start with this method of cutting. Learn the basics first, practice for a long time, and then commit to improving your skills as you ride the learning curve. This is the best method of becoming a skilled handyman in any trade.

Indianapolis Drywall Services You Can Trust

Call Drywall by Local Builders at 317-269-7319 when you need professional drywall services in Indianapolis, Indiana. We are a licensed, bonded, and insured drywall company that provides residential and commercial drywall work at competitive prices. Our highly trained and experienced drywall contractors are fully equipped to provide quality drywall repair services regardless of your projects size and scope. And as a licensed, bonded, and insured company, we guarantee all of our drywall work. Call 317-269-7319 to request a free estimate, today. Call 317-269-7319 to request a free estimate, today.

Indianapolis Drywall Contractors
Indianapolis Drywall Contractors 317-269-7319

How to Get a Stripped Screw Out of the Wall

Whether you forgot to drill a pilot hole or drove a screw too quickly, nothing puts a stop to your project faster than a screw with stripped head. Fortunately, there’s a smooth and efficient way to deal with this frustrating problem. All you need are a few tools and supplies, all of which are reasonably-priced and sold at any local home improvement or hardware store in your neighborhood.

Continue reading to review a basic guide to removing stripped screws from drywall.

Indianapolis Drywall Contractors 317-269-7319
Indianapolis Drywall Contractors 317-269-7319

What You Will Need

☑ Drill
☑ Screw Extractor Set
☑ Long-Nose Locking Pliers

For Screw Heads Above the Wall:

Clamp your locking pliers onto the screw, positioning them as close to the wood as possible.

Once you have a solid grip, use the pliers to gently turn the screw counterclockwise. Be gentle to avoid snapping off the screw head.

You can use a piece of cardboard to place around screw to prevent any accidental scratching.

For Screw Heads At or Under the Wall:

For screw heads that are flush with the wood surface or slightly below, you will need to use your screw extractor set.

Using your drill, make a 1/8 inch deep hole in the top of the screw head. It should be large enough to accept the largest screw extractor that will fit the head.

Position the extractor into the hole you drilled, and then slowly turn it counterclockwise and press down until you feel the extractor threads catch.

Slowly turn the extractor to wind the screw out just enough to where you can grab it with your gripping pliers.

Tips for Preventing Stripped Screw Heads

☑ For screws 2 1/2 inches or longer, rub the heads with candle wax or beeswax to reduce friction.

☑ Do not forget to drill pilot holes for your screws.

☑ Choose a drill set that lets you drill pilot holes in multiple sizes to match your screws.

☑ Drill larger pilot holes for hardwoods to avoid splitting.

☑ Always choose the proper screws for your project.

If you have a home improvement project you’ve been waiting to get done, consider professional home remodeling services for outstanding results in a convenient time frame. Need a deck built? Or perhaps some drywall installed? These are the types of services that are better performed by a licensed contractor who retains the proper tools, training, and skills to deliver responsible work and professional results.

Did You Do a Little Damage to Your Drywall? No Problem!

Call Drywall by Local Builders at 317-269-7319 when you need professional drywall services in Indianapolis, Indiana. We are a licensed, bonded, and insured drywall company that provides residential and commercial drywall work at competitive prices. Call 317-269-7319 to request a free estimate, today. Call 317-269-7319 to request a free estimate, today.

Indianapolis Drywall Contractors
Indianapolis Drywall Contractors 317-269-7319